Thane West, Thane, Maharashtra
GST No. 27AACFA0978M1Z6
Approx. Rs 15 Lakh / UnitGet Latest PriceProduct BrochureProduct Details:
|Minimum Order Quantity
|Capacity Inlet Flow Rate
Barton's Oxide Systems
Lead is melted in a Melting Pot and is pumped into the Reaction pot, where the exothermic reaction of converting Lead to Lead Oxide takes place. The reaction temperature and reaction ampere is controlled to achieve stable reaction and desired quality. Negative pressure is maintained in the reactor. The oxide is removed from the reactor by sucking fresh air through it. The oxide is collected in the cyclone and the Dust Collector.
The dust collector fitted wit PP coated filter bags, filters the air and leaves fresh air tote atmosphere. The exhaust air from the Dust collector meets the environmental emission standards.HEPA filters can also be used as the Dust Collector.
The reaction temperature is controlled by controlling the feed to the reaction pot and the amount of air sucked through the reactor. Water can also be used the control the temperature.
Reaction load i.e ampere of the reactor is controlled by controlling the amount of lead entering the reactor.
System Draft is measured and controlled by a motorized butterfly Damper, through the control panel.
Explore More Products