Ball Mill Oxide Systems

Approx. Rs 30 Lakh / PieceGet Latest Price

Operation

Lead Ingots are melted in the Melting Pot. The Molten Lead in the Melting Pot is pumped on to the Cylinder casting Machine. The Lead cylinders are casted in the Cylinder casting machines at a rate higher than that of the oxidation process. These Lead cylinders are conveyed and stored in a Silo.
The Silo feeds the required amount of Lead Cylinders into the Mill as and when required. The amount of Lead Cylinders being discharged from the Silo is adjustable from the PLC system. Lead Cylinders tumbling inside the Ball Mill drum create heat due to friction between them. This heat initiates the oxidation process. The oxidation process is also an exothermic reaction. This exothermic heat raises the temperature of the material which in tum accelerates the oxidation process. A draft of air through the Ball Mill drum gives oxygen for the oxidation process and also carries the Battery Oxide to the collection system.
The Collection System includes a combination of cyclone and dust collector or just dust collector. Battery oxide is collected and conveyed to storage silos. The Silos storing Battery Oxide are purged with Nitrogen to keep the temperature of the Oxide in check.

• Reaction temperature :

Reaction temperature is monitored using thermocouples and is controlled by periodic water cooling.

• Load in the Ball Mill :

The Load in the Ball Mill can be monitored by Load cells or by current consumption . According to the load in the mill, new material is fed automatically when the load reduces.

• System Draft :

The System draft or air flow through the ball Mill is very precisely controlled and monitored. Te air flow volume is controlled by a motorized butterfly valve and te corresponding static pressure is monitored by pressure sensors.

• Fully Automatic with PLC based Control system
• Totally Enclosed System
• Touch Screen Based Interface
• One Button Start / Stop
• 24 Hour Operation